About Us       Products       Resources       Contact Us       Home
Four Function  Mono-Heat Pump 
Four Function
Mono-Heat Pump 

How many watts do you need?
Click here for free evaluation

Polar AIr Four Function Mono-Heat Pump

Click for technical specifications.

Feature Advantages

  • Four functions: heat, air-conditioning, air-cleaning and fresh air intake
  • Only one inside unit - no outside unit
  • Low maintenance – results in less service and repair costs
  • Longer life span – more economical
  • Environmentally friendly - reduces carbon emissions (CO2)
  • Increases the value of the home according to EPA
  • Modern and attractive unit design suitable for all types of homes
  • Suitable for hotels, historical buildings, government housing and other buildings with restrictions on outdoor units or refrigerant piping distance

Technical Advantages

  • Next generation product design and construction
  • Excellent energy efficiency
  • Market leading operating range (-11F to 125.6F) with up to 10,000 BTU/hr integrated heating for cold weather operation
  • The 10,000 Btu/hr integrated heat is combining the heating capacities of heat pump (3000Btu/hr) and PTC electric heater (7000Btu/hr)
  • Flexible condensate drainage solutions
  • Fresh air intake solutions
  • The heat pumps could easily be connected to a data network with optional local PC host control program ( controls up to 400 units)
  • Virtual "plug and play" install – eliminates the need for line sets and no refrigerant technician or inspector is required
  • EC motor technology increases energy efficiency levels which equates to lower consumption costs

Dimensions

  • W: 42.91, H: 22.83, D: 9.65

 

Apero Heater 
Apero Heater 
How many watts do you need?
Click here for free evaluation

Digital Apero Heater (240V)

Available in 500W—2000W models.

Click for technical specifications.

The Digital Apéro is the very essence of Convectair design, pure and simple. It works on the proven principle of, natural convection and its thermostat control is sensitive to 1/10ºC (1/5ºF).

It's the perfect choice when you need to replace an old baseboard heater or when there's a spot in your home that your central heating system doesn't heat adequately.

Cabinet

  • Front-louvered air outlet that hides the unit interior and directs heat towards the center of the room
  • Automatic power shut-off in case of overheating
  • Steel construction with polyester/epoxy anti-rust coating
    Bottom-mounted protective pan
  • Built-in electronic proportional action thermostat ultra-sensitive to 1/10°C (1/5°F).

Control Switch

  • Temperature setting dial can be locked
  • Heating indicator light
  • Full control over all features
  • Convection: X-Shaped, mono-block element made of
    surface-treated extruded aluminum.
  • Automatic reset overheat protection.
  • Gentle, even heat; completely silent operation
  • Timer control and room temperature ventilation
    control with indicator lights

 

Calypso Heater
Calypso Heater 
How many watts do you need?
Click here for free evaluation

Calypso Heater (12ov & 240V)

The 120V Calypso by Convectair is a unique, ingenious unit designed specially for your bathroom. It is equipped with a discreet fan and has a standard 1000 W heating option controlled by a built-in electronic thermostat (1000 watts), as well as a 2000 W quick-heat option with a 30-minute timer.

The Calypso also comes with a removable, washable lint filter and is available in 120 V or 240 V

Dimensions

  • H - 8.5 in. / W - 12.5 in. / D - 5.5 in

Cabinet

  • Front-louvered air outlet distributes warm air from floor to ceiling for greater comfort and efficiency.
  • Built-in side wire covers.
  • Scratch-resistant, easy-to-maintain finish
  • Steel construction with polyester/epoxy anti-rust coating.
  • Removable dust filter is easy to clean and provides longer, carefree operation.

Control Switch

  • On/Off switch, serving also as manual reset
  • Heating indicator light
  • Warning light indicates obstructed dust filter or other abnormal condition
  • Easy to operate thermostat setting dial (1000 W)
  • 0­30-minute timer (2000 W)

 

Allegro Heater
Allegro Heater 
How many watts do you need?
Click here for free evaluation

Allegro Heater (240V)

Click for technical specifications.

Technical specifications.

The Allegro is a natural convection electric wall heater with a unique design and all the Convectair advantages

Connection

  • 240V sixty cycles with armoured cable complete with junction box cover and wire connector with heater. Installation requires a wall box (not included)

Control

  • Electronic Thermostat built in with ultra-precise 1/5 degree F sensitivity
  • Located on the top right hand side of the unit with see-through lockable protective cover
  • 2 user settings plus a frost protection setting (45 degrees)
  • Programmer option for timed settings.

Convection

  • X-shaped, monoblock element made of surface treated extruded aluminum. Manual reset overheat protection

 

Opera Heater
Opera Heater 
How many watts do you need?
Click here for free evaluation

Opera Heater (750W & 1,250W)

When there's not much room for a heating unit, the Opera by Convectair is the ideal choice.

This streamlined electric wall heater easily tucks into a corner and radiates heat silently and efficiently.

Equipped with an electronic thermostat that is compatible with the Programmer system, the Opera offers an innovative solution to space problems.

The 240V 1250W model supplies over 4200 BTU/hr of warmth in tough to reach places!

Dimensions

  • H - 39.5 in. / W - 10 in. / D - 7.75 in

Cabinet

  • All steel construction with front grille
  • Rounded corners for child safety
  • Concave body for maximum space savings and lateral radiant heat output
  • Polyester/epoxy anti-rust coating
  • Two-tone finish:white (front panel); sepia black (body)
  • Resistant and easy to maintain

Control Switch

  • Built-in electronic proportional-action thermostat
    Ultra-sensitive to 1/10ºC
  • 5-function selector with indicator light: Off; Comfort; Economy; Frost Protection (8º C / 45º F)
  • Located on the back of the unit; can be accessed by pivoting the unit

 

Four Function  Mono-Heat Pump 
Four Function
Mono-Heat Pump 

How many watts do you need?
Click here for free evaluation

Four Function Mono-Heat Pump

  • Four functions: heat, air-conditioning, air-cleaning and fresh air intake
  • Only one inside unit - no outside unit
  • Low maintenance – results in less service and repair costs
  • Longer life span – more economical
  • Environmentally friendly - reduces carbon emissions (CO2)
  • Increases the value of the home according to EPA
  • Modern and attractive unit design suitable for all types of homes
  • Suitable for hotels, historical buildings, government housing and other buildings with restrictions on outdoor units or refrigerant piping distance

Technical Advantages

  • Next generation product design and construction
  • Excellent energy efficiency
  • Market leading operating range (-11F to 125.6F) with up to 10,000 BTU/hr integrated heating for cold weather operation
  • The 10,000 Btu/hr integrated heat is combining the heating capacities of heat pump (3000Btu/hr) and PTC electric heater (7000Btu/hr)
  • Flexible condensate drainage solutions
  • Fresh air intake solutions
  • The heat pumps could easily be connected to a data network with optional local PC host control program ( controls up to 400 units)
  • Virtual "plug and play" install – eliminates the need for line sets and no refrigerant technician or inspector is required
  • EC motor technology increases energy efficiency levels which equates to lower consumption costs

Dimensions

  • W: 42.91, H: 22.83, D: 9.65